S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
/Page-4170002.png)
‹› Disregard - 2 -.
-
Pull bulb holder - 1 - from housing - arrow -.
-
Pull bulb out of bulb holder.
Installing
Install in reverse order of removal, noting the following:
CAUTION!
‹› Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that
evaporates on the bulb during operation can cause the glass to cloud over.
‹› When installing housing cover, ensure proper seating. Water intrusion will damage headlamp.
-
Insert new bulb in bulb holder.
-
Press parking lamp bulb holder into reflector until felt to engage.
-
Position high beam headlamp bulb at lower spring clip.
-
Push high beam headlamp bulb into housing (overcome resistance of upper spring clips).
-
Close housing cover.
-
Secure housing cover with retaining clip.
