S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
Coolant Line/Hose: Service and Repair
Front Coolant Pipe
Front Coolant Pipe
Special tools, testers and auxiliary items required
‹› Drip tray for workshop crane (VAS 6208)
Removing
-
Drain coolant. Refer to => [ Cooling System, Draining and Filling ] See: Engine, Cooling and Exhaust/Cooling System/Service and
Repair/Procedures.
-
Bring lock carrier into service position. Refer to => [ Lock Carrier, Moving into Service Position ] See: Engine, Cooling and
Exhaust/Engine/Service and Repair/Removal and Replacement/Lock Carrier, Moving Into Service Position.
-
Remove bolts - arrows - and remove torque support from engine.
-
Place drip tray for workshop crane (VAS 6208) under engine.
-
Remove front coolant pipe on engine - arrows -.
Installing
Installation is in reverse order of removal, note the following:
‹› Replace seals and O-rings.