S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
/Page-127003.png)
CAUTION!
To prevent damage (burning) to the wiring and harness connections, insulation and the electronic control module, perform the following
work steps exactly! Observe operating instructions for the heat gun.
CAUTION!
The heat gun, shear bolts, and parts of the protective housing will become extremely hot. Use extreme caution when working with or
handling these parts to avoid personal injury.
-
Using a Heat gun set at its lowest setting, heat the shear bolt for approx. 20 to 25 seconds.
-
Remove the shear bolt with locking pliers. Discard the used shear bolts.
