S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
/Page-3141001.png)
Child Seat: Testing and Inspection
Child-seat Restraint Function For Additional Child Seats (Not For Drivers Seat Belt), Checking
-
The complete belt assembly (including side panel trim) must be installed when checking this function.
-
Activation of restraint function:
-
Pull out webbing as far as possible.
-
Correct function:
-
The belt should retract with an audible noise.
-
If the belt retraction is stopped, it should not be possible to pull the belt out again until the function is deactivated.
-
Deactivation:
-
Allow the belt to retract as far as the last 100 mm (approx.).
-
Restraint function must be deactivated at the latest when the last 100 mm are reached. The belt then re-assumes its normal function.
