S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
Seat Belt: Service and Repair
Passive Occupant Detection System Belt Latch
Passive Occupant Detection System Belt Latch
CAUTION!
Observe safety precautions. Refer to => [ Pyrotechnic Belt Tensioners Safety Precautions ] See: Seat Belt Tensioner/Service Precautions
‹› The passenger occupant detection system safety belt latch is only installed on the passenger seat.
-
Remove seat:
Removing
CAUTION!
‹› Replace the passenger occupant detection system safety belt latch each time the passenger belt tensioner deploys.
‹› Observe safety precautions. Refer to => [ Pyrotechnic Belt Tensioners Safety Precautions ] See: Seat Belt Tensioner/Service Precautions
Removing
-
Disconnect connector - 1 - under seat.
-
If present, remove cable from clip - 2 - equipment versions.
-
Remove the bolt - 3 -.
-
Remove safety belt latch - 4 -.
Installing
CAUTION!
‹› Replace the passenger occupant detection system safety belt latch each time the passenger belt tensioner deploys.
Installation is performed in reverse order of removal, noting the following.
-
Replace the bolt on the safety belt latch.