S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
Power Seat Switch: Service and Repair
Microswitch For Seatback Release, Assembly Overview
Microswitch For Seatback Release, Assembly Overview
1
-
Cable tie
2
-
Connector
3
-
Circlip
4
-
Microswitch for seatback release
Removing
-
Remove seat.
-
Attach fixture for seat repair VAS 6136 to engine and transmission holder VAS 6095.
-
Attach front seat to fixture for seat repair VAS 6136.
-
Remove door sill side seat trim.
-
Remove tunnel side seat trim.
-
Remove backrest.
-
Remove backrest panel.
-
Remove backrest frame.
-
Remove backrest cover and cushion.
-
Use a screwdriver to pry out circlip - 3 -.
-
Press together catches - 5 - (2x) and remove microswitch - 4 -.
-
Disconnect connector - 2 -.
Installing
-
Press in microswitch - 4 - until the catches - 5 - (2x) engage.
-
Connect connector - 2 -.
-
Install backrest cover and cushioning.
-
Install backrest.
-
Install seat.
-
Adjust microswitch for seatback release.
-
Insert the circlip - 3 -.
-
Install backrest frame.