S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
Wiring Harness: Procedures
Fiber Optic Cables, Repairing
Fiber Optic Cables, Repairing
Special tools, testers and auxiliary items required
-
Fiber Optic Plier Repair Set VAS 6223
-
Air Hose Pliers VAS 6228
Checking remaining cut indicator
-
Start by checking remaining cut indicator:
-
The Pliers For Fiber-optic Conductor VAS 6223/1 cutting device can perform approx. 1260 cuts. The blade is rotated for each further cut.
-
The remaining cut indicator - arrow - displays the last 150 cuts available.
-
Once no further cuts are available, the blade is blocked. It must then be replaced Pliers For Fiber-optic Conductor VAS 6223/1 instructions.
Preparing Pliers For Fiber Optic Conductor VAS 6223/1
-
Release transportation safeguard at cutter by loosening Allen bolt - arrow -.
Fiber optic cable, cutting to length
-
Establish length of fiber optic cable required.
-
Open Pliers For Fiber Optic Conductor VAS 6223/1 and insert fiber-optic cable - 1 - into trimming station.
-
Close cutting tool to cut fiber optic cable to length.
Stripping
-
Open Pliers For Fiber Optic Conductor VAS 6223/1.
-
Stripping lever must be in lower position - arrow -.
-
Place fiber optic cable - 1 - in stripping point.
-
Fiber-optic cable must terminate flush to rear side of cutting pliers.