S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
-
Insert hydro-mount - A - into special tool (3347/2).
-
Tighten together with Front and Rear Bearing Tool (3348), spindle -3346/2- and hex nut.
-
Pull in hydro-mount - A - until it stops.
-
Insert hydro-mount - A - into special tool (3347/2).
-
Tighten together with Front and Rear Bearing Tool (3348), spindle -3346/2- and hex nut.
-
Pull in hydro-mount - A - until it stops.