S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
Stabilizer Bushing: Service and Repair
Stabilizer bushings, replacing
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G 1331
Removing
-
Remove bolt - 1 -.
-
Remove clamp - 2 - and rubber bushing - 3 -.
Installing
-
Rubber bushing must rest on stabilizer bar collar - arrow -.
-
Only hand-tighten bolts - 1 - for the time being.
-
Place vehicle on wheels and bounce several times.
-
Tighten bolts - 1 -.