S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
/Page-2821002.png)
1
Left underbody trim
-
If present, remove diagonal braces - 1 - and - 2 -. Refer to => [ Front or Rear Diagonal Braces ] See: Body and Frame/Frame/Structural
Brace/Service and Repair/Rear Suspension.
Only with rear hydraulic mounting
-
Remove stabilizer bar. Refer to => [ Stabilizer Bar ] See: Stabilizer Bar/Service and Repair/Rear Suspension/Stabilizer Bar.
Procedure for front and rear hydraulic mountings
-
Position Engine/Transmission Jack (V.A.G 1383 A) with Universal Transmission Support (V.A.G 1359/2 ) and a corresponding wooden block at
subframe or final drive (Fig. for vehicles with front wheel drive).
