S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
Tires: Removal and Replacement
Metal Valve Body
Metal Valve Body
Special tools, testers and auxiliary items required
-
Torque wrench V.A.G 1410
-
Place metal valve with rubber seal through rim from inside.
-
Position beveled washer and union nut from outside and tighten.
-
Secure against turning with counter hold - 1 - (e.g. drill bit diameter 2 mm).
-
Press wheel electronics - 1 - into bed and fasten at rear of valve with microencapsulated bolt.