S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
The ATF charging device must be clean and the ATF must not be mixed with other types of ATF!
-
Secure reservoir for ATF charging device V.A.G 1924 as high as possible on vehicle.
-
Start engine and let it idle.
-
Place drip tray V.A.G 1306 under transmission.
CAUTION!
Wear safety goggles.
-
When an ATF temperature of 35 degrees C is reached, remove ATF inspection plug - arrow B - and drain off any surplus ATF.
-
Replace seal - arrow - for ATF inspection plug.
If ATF comes out of inspection hole before ATF has reached 40 degrees C the ATF level - arrow - is OK.