S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
-
If present, carefully remove oil strainer seal - A - from transmission, e.g. with a screwdriver.
‹› Do not damage sealing surface.
‹› The seal is shown with the Mechatronic removed to provide a better illustration.
‹› The new ATF strainer is supplied with the seal in place.
Continued for new and old ATF strainer:
-
Carefully press oil strainer intake tube - A - into opening in transmission as far as stop.
‹› A new oil strainer with attached seal is pressed into transmission.
-
Install oil pan. Refer to => [ Oil Pan ] See: Fluid Pan/Service and Repair/09LA Transmission.
-
Fill with ATF. Refer to => [ ATF, Draining or Filling after Repair ] See: Fluid - A/T/Service and Repair/09LA Transmission/ATF, Draining or
Filling After Repair.