S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
8 - Nut, 5 Nm
^
For securing bracket to transmission
9 - Union nut, 29 Nm
10 - Union nut, 29 Nm
11 - Plug connector
12 - Bolt, 5 Nm
^
For securing ATF lines at front end
13 - Bolt, 5 Nm
^
Before tightening bolt, push in line onto stop by hand
^
For securing ATF line to bracket at ATF cooler (bottom)
14 - ATF line
^
Inserted into ATF cooler (bottom)
^
Before tightening bolt, push in ATF line onto stop by hand
15 - O-ring
^
Replace
^
Lubricate with ATF when installing
16 - Bolt, 5 Nm
^
For securing ATF line at ATF cooler (top)
^
Before tightening bolt, push in line onto stop by hand
17 - ATF line
^
Inserted into ATF cooler (top)
^
Before tightening bolt, push in ATF line onto stop by hand
18 - O-ring
^
Replace
^
Lubricate with ATF when installing