S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
/Page-1467003.png)
‹› If the shaft is not held centered, the shaft teeth damage the sealing ring between the final drive and transmission housing. The shaft seal must then
be replaced. Refer to => [ Final Drive/Transmission Housing Shaft Seal, Replacing ] See: Seals and Gaskets/Service and Repair/Final Drive,
Differential (01VA Transmission).
-
Fasten left drive axle to the flange shaft.
-
Check oil level in front final drive.
Tightening Specifications
