S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
Seals and Gaskets: Service and Repair
Final Drive Cover O-Ring, Replacing
Final drive cover O-ring, replacing - 09L, 6 Speed AWD A/T
Special tools, testers and auxiliary items required
^
Drip tray V.A.G 1306
Procedure
^
Transmission installed
Note:
^
General repair instructions.
^
Read the rules for cleanliness when working on the automatic transmission.
-
Remove transmission support (right-side).
-
Place drip tray V.A.G 1306 under transmission.
-
Remove flange shaft (right-side).
-
Remove bolts on final drive cover in sequence - 11 to 1 - and remove cover together with outer race for tapered roller bearing and shim.
Note:
^
Thickness of shim has been measured to fit; the shim must not be replaced with another shim of different thickness.