S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
Seals and Gaskets: Service and Repair
Final Drive/Transmission Housing Oil Seal, Replacing
Final drive/transmission housing oil seal, replacing - 09L, 6 Speed AWD A/T
Special tools, testers and auxiliary items required
^
Drip tray V.A.G 1306
^
Extractor lever VW 681
^
Thrust piece T10139
Requirements
^
Transmission is removed
^
Transmission mounted on assembly stand.
CAUTION!
Do not place transmission down on the oil pan.
Procedure
Note:
^
A faulty seal allows gear oil to enter the torque converter bell housing.
^
General repair instructions.
^
Read the rules for cleanliness when working on the automatic transmission.
-
Remove transmission support (right-side).
-
Place drip tray V.A.G 1306 under transmission.
-
Remove flange shaft (right-side).