S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
/Page-1562002.png)
-
Check that the pivot pins are engaged in the Tiptronic locking lever.
-
Install Shift lock solenoid N110 - item 7 -.
-
Clip selector gate - 12 - onto selector housing - 14 - and tighten to 0.4 Nm.
Removing and installing securing spring for locking cable
Removing
-
To remove locking cable lift spring slightly at top - arrow B -.
-
Disengage spring from retainer lug - arrow C - and lift out.
Installing
-
Insert spring from above - arrow B - and engage under retainer lug - arrow C -.
-
Align spring so that it lies level in groove - arrow A -.
-
To install locking cable, lift spring slightly at the top - arrow B -.
