S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
/Page-1612004.png)
-
Tighten bolts - 1 - and - 2 - for mechatronic unit to 2 Nm.
-
Then tighten bolts to 8 Nm in specified sequence - 1 to 11 -.
-
Connect securing clamp - arrow - on wiring harness connector.
-
Install oil strainer. Refer to => [ Oil Strainer ] See: Fluid Filter - A/T/Service and Repair/09LA Transmission.
-
Install oil pan. Refer to => [ Oil Pan ] See: Fluid Pan/Service and Repair/09LA Transmission.
