S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
/Page-1624004.png)
-
Insert line - B - in clutch slave cylinder until you hear it engage.
-
Before installing clutch slave cylinder in transmission housing, boot area - a - must be coated with Lithium Grease (G 052 150 A2).
-
Lightly coat contact surface for plunger on clutch release lever with Copper Grease (Z 381 351 TE).
-
If equipped, engage hose/line assembly bracket - 3 - in clutch slave cylinder - 4 -.
