S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
Clutch Pedal Assembly: Removal and Replacement
Pedal Assembly Overview
Pedal Assembly Overview
1
Mounting bracket
‹› Removing and installing, refer to => [ Clutch Master Cylinder ] See: Clutch Hydraulic System/Clutch Master Cylinder/Service and
Repair/0A3A Transmission M/T
2
Mounting pin for clutch and brake pedal
3
Locking clip
4
Internal hex bolt - 25 Nm
5
Brake pedal
‹› Maintenance free bearing; do not lubricate
6
Clutch Pedal Switch (F 36)
‹› May be installed just one time; must be replaced when removed
‹› Removing and installing, refer to => [ Clutch Pedal Switch ] See: Clutch Switch/Service and Repair/0A3A Transmission/Clutch Pedal Switch
7
Internal hex bolt - 5 Nm
‹› To secure mounting pin for clutch pedal and brake pedal