S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
1 - Clutch slave cylinder
^
Removing and installing on vehicles with 8-cylinder engine
^
Do not operate clutch pedal after slave cylinder has been removed.
^
Follow correct procedure when bleeding.
^
Tighten bleeder valve to 4.5 Nm.
^
When installing, push in until the securing bolt can be installed.
2 - Hexagon socket head bolt, 23 Nm
^
Clutch slave cylinder to transmission
^
Self-locking
^
Replace
3 - Bracket
^
For line/hose assembly
^
Bolt to transmission with clutch slave cylinder
4 - Operating rod
^
Lubricate end of operating rod with copper grease Z381351TE.
5 - O-ring
^
Always replace
^
Lubricate with gear oil before installing