S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
Pilot Bearing: Service and Repair
Needle Bearings, Removing and Installing in Dual-Mass Flywheel
Needle Bearings, Removing and Installing in Dual-Mass Flywheel
Special tools, testers and auxiliary items required
‹› Bearing driver (3264)
‹› 1 - Internal puller (Kukko 21/1)
‹› 4 - Counter-support (Kukko 22/1)
Work procedure
‹› Transmission removed.
-
Remove clutch pressure plate.
-
Pull out needle bearing using internal puller ( Kukko 21/1) and support (Kukko 22/1).
-
Drive in needle bearing using bearing driver ( 3264) into dual-mass flywheel until it reaches stop.
-
Install clutch pressure plate.