S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
3 - Driveshaft
^
Removing and installing Audi A4, Audi A6
^
Removing and installing Audi A8
4 - Balancing washer
^
Not present on every vehicle
^
If present, this balancing washer must no longer be installed after disconnecting driveshaft from rear final drive.
5 - Socket head bolt, 55 Nm
^
Self-locking
^
Always replace
^
Threaded holes for bolts in drive flanges must always be cleaned. (e.g. using a tap)
^
Loosened and tightened with parking brake engaged.
6 - Backing plate
7 - Intermediate bearing
8 - Hex bolt, 25 Nm
9 - Transmission