S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
Constant Velocity Joint: Overhaul
Triple Roller Joint AAR 2000, Assembling
Triple Roller Joint AAR 2000, Assembling
-
Slide joint protective boot onto driveshaft.
-
Slide joint piece onto drive axle.
Mount triple roller star
The chamfer on star faces toward shaft, this is used as an assembly aid.
-
Before installing joint or triple roller star, splines - A - must be lightly coated with grease used in joint.
-
Install triple roller star onto shaft as per markings and drive in to stop.
A second mechanic is needed to slide protective boot back.
Use special tool shown in illustration.
-
Insert securing ring, be sure to fit properly.
-
Press 80 grams of joint grease from repair set, into triple roller joint.
-
Slide joint piece over rollers and secure.
-
Press 30 grams of joint grease, from repair set, into the reverse side of the triple roller joint.