S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
/Page-1706002.png)
This illustration only applies to conical drive axle - arrow -!
-
Use special tool shown in illustration.
Special tool T10065/2 must not come in contact with roller body
This illustration only applies to cylindrical drive axle - arrow -!
-
Use special tool shown in illustration.
Special tool T10065/3 must not come in contact with roller body
-
Press triple roller joint onto drive axle
-
Circlip must engage audibly, triple roller star must lie against circlip with no gap.
