S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
7
Window regulator
‹› Removing => [ Rear Window Regulator Assembly Overview ] See: Window Regulator/Rear Door Window Regulator/Service and Repair/Rear
Window Regulator Assembly Overview.
8
Nut
‹› 6 Nm
9
Window regulator motor
‹› Can be removed and installed with window regulator in any position.
‹› When removing, cable tensioner must not be loosened from window regulator.
‹› Removing => [ Rear Window Regulator Motor ] See: Window Regulator/Rear Door Window Regulator/Service and Repair/Rear Window
Regulator Motor.
10
Screw
‹› 4.5 Nm
Spacer installation location
1. Angle bracket
2. Spacer plate
3. Side window
4. Window regulator
5. Spacer plate
6. Nut