S4 Quattro Sedan V6-2.7L Turbo (APB) (2000)
/Page-3691002.png)
-
Install strap -A- (on bracket for motor) first into mounting -B- (on heater/air conditioning assembly).
-
After installing, always check DTC memory.
-
Testing -V85- (output DTM).
-
Electrical test.
-
Wiring harness must be installed so that it does not come in contact with moving components (e.g. motor linkage).
-
If the crank on the motor is positioned so that the lever can not be hooked in or the motor can not be installed, connect motor to the wiring harness,
switch on ignition and place lever in appropriate position by activating the button for air distribution on A/C control head -E87-.
