S4 Quattro Sedan V6-3.0L SC (CCBA) (2010)
/Page-209002.png)
1. Ensure the VAS tester is at software version 16.16 or higher.
Tip: To perform this repair, the VAS tester must be at software version 16.16 or higher.
2. In GFF or Guided Functions, select Transmission Electronics, functions >> Basic Setting.
3. Select and perform the Calibration of Gear Position Distance Sensors -G487- to G-490- .
4. When finished, the test plan will ask if there are more basic settings you would like to perform.
Select Yes.
