S4 Quattro Sedan V8-4.2L (BHF) (2005)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor G, Removing and Installing - From 11.04
Fuel Level Sensor G, Removing And Installing
Removing
Observe safety precautions
Observe rules for cleanliness.
-
Remove fuel delivery unit.
-
Release retaining tabs - arrows - with a screwdriver and pull Fuel Level Sensor G upward and out.
-
Disengage electrical connectors - 1 - and - 2 - and disconnect them.
Installing
Installation is in reverse order of removal. Note the following:
-
Connect electrical connections - 1 - and - 2 - and check that they are securely engaged.
-
Insert Fuel Level Sensor G in the guides on fuel delivery unit and push down until it engages.
-
Install fuel delivery unit, observing notes for connecting battery.