S4 Quattro Wagon V6-2.7L Turbo (APB) (2002)
/Page-1640001.png)
Relay Box: Removal and Replacement
Auxiliary Relay Panel/Auxiliary Fuse Panel, Removing and Installing
Auxiliary Relay Panel/Auxiliary Fuse Panel, Removing And Installing
Location: in footwell, bottom left.
-
Remove nut -A- (2 Nm or 18 in. lb) and self-tapping screw -B-.
-
Remove relay and control module, unclip relay carrier and, if necessary, unclip auxiliary relay panel.
-
Pull out auxiliary relay panel from retainers and remove from below.
-
Install in reverse order of removal.
