S4 Quattro Wagon V8-4.2L (BHF) (2008)
^
Wheel hub support T40033/4
^
Press piece T40033/5
^
Wheel hub support T40033/6
^
Spindle T40034
^
Nut T40034/1
^
Nut T40034/2
Note:
^
The same special tools and workshop equipment can be used to replace subframe mounting on vehicles with front and all wheel drive.
^
The subframe does not have the usual bonded rubber bushings, but rather has hydraulic bushings.
^
The bushings can only be removed and installed with the subframe lowered.
^
Identify bushing location to subframe before removing.
Remove front or rear hydraulic bushings
-
Remove wheels.
-
Remove left and right coil spring.
-
Only remove rear left/right underbody trim if front hydraulic mounting will be replaced.
1 - Left underbody trim
-
If present, remove diagonal braces - 1 - and - 2 -.
Only with rear hydraulic bushing
-
Remove stabilizer bar.
Procedure for front and rear hydraulic bushings