S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-3634005.png)
-
Remove E-box plenum chamber cover - arrows -.
-
Carefully pry off mounting bracket - arrow - assisted with a screwdriver and lay Engine Control Module (ECM) with attached wires aside.
-
Unclip retaining bracket.
-
If present, lay aside transmission control module with wiring connected.
-
Remove bolts - 2 - (2x) of connector station.
Tightening torque: 3 Nm
-
Remove central tube bolt - 1 - for instrument panel in plenum chamber.
Tightening torque: 6 Nm
-
Remove left bolts - 1 - (2x).
Tightening torque: 35 Nm
