S4 Quattro Wagon V8-4.2L (BHF) (2008)
1
C-pillar Trim
‹› Removal:
-
Remove - D - pillar trim. Refer to => [ D-Pillar Trim ] See: D-Pillar Trim.
-
Remove two bolts - 2 - on C-pillar trim - 1 - at top and bottom.
-
Remove side upholstery. Refer to => [ Rear Seat Side Upholstery ] See: Seats/Service and Repair/Removal and Replacement/Rear Seats.
-
Remove clip - 3 - beneath side panel: Press a screwdriver between both parts of the clip and pull the upper part upward. Lower clip part
compresses and can be loosened.
-
Unclip rear shelf at outer clip and raise it up.
-
Unclip C-pillar trim at clip - 4 - and remove it.
‹› Installing:
CAUTION!
Always follow installation sequence for C-pillar trim.
-
Raise rear shelf.
-
Position trim - 1 - into mounts at rear shelf.
-
Install clip - 4 - in its mount.
-
Press lower part of clip - 3 - together and insert clip again.