S4 Quattro Wagon V8-4.2L (BHF) (2008)
Trim Panel: Service and Repair
Upper B-Pillar Trim
Upper B-Pillar Trim
CAUTION!
Note safety precautions for working on airbags. Refer to => [ Airbag System Safety Precautions ] See: Restraint Systems/Air Bag
Systems/Service Precautions/Technician Safety Information and side curtain airbags => [ Side Curtain Airbag Safety Precautions ] See:
Restraint Systems/Air Bag Systems/Air Bag/Service Precautions/Side Curtain Airbag Safety Precautions.
1
B pillar Trim
‹› Removal:
-
Remove outer seatbelt anchor. Refer to => [ Seat Belt Anchor ] See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair.
-
Remove upper A-pillar trim. Refer to => [ Upper A-Pillar Trim ] See: Upper A-Pillar Trim.
-
Remove upper D-pillar trim. Refer to => [ D-Pillar Trim ] See: D-Pillar Trim.
-
Remove B-pillar trim - 1 - from door rubber.
-
Unclip lower two clips - 2 - at trim.
-
Unclip upper two retaining tabs - 5 - at trim - 1 -.
-
Remove trim - 1 - vertically downward.
-
Remove lower belt on seat at outer belt buckle anchoring point. Refer to => [ Seat Belt Anchor ] See: Restraint Systems/Seat Belt Systems/Seat