S4 Quattro Wagon V8-4.2L (BHF) (2008)
1
D-pillar trim
‹› Removal:
-
Remove roof panel trim => [ Roof Panel Trim, Removing and Installing ].
-
Remove bolt - 3 - by sliding covering plate in eyelets to the rear => [ Partition grille lifting eyes, loosening ].
-
Release only the rear edge of luggage compartment side trim => [ Luggage Compartment Side Trim ].
-
Unclip D-pillar trim - 1 - from top downward.
-
Remove D-pillar trim upward out of luggage compartment side trim.
-
Remove D-pillar trim to the rear from trim - 4 - above rear door.
-
Remove bolts for head-level airbag in rear area => [ Side Curtain Airbag, Avant ] See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Removal and Replacement/Side Curtain Airbag, Servicing.
-
Remove the bolts - 6 -.
-
Remove trim - 5 - above rear side window.
‹› Installing:
To install, perform the steps used in removal in reverse order. Observe the following when doing so:
-
Secure head-level airbag with new bolts => [ Side Curtain Airbag, Avant ] See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Removal and Replacement/Side Curtain Airbag, Servicing.