S4 Quattro Wagon V8-4.2L (BHF) (2008)
1
-
Four-way lumber support motors (Qty. 2)
2
-
Seat height adjustment motor
Removal
-
Remove seat.
-
Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.
-
Attach the front seat to the fixture for seat repair VAS 6136.
-
Remove side trim on sill side.
-
Remove side trim on tunnel side.
-
Remove the backrest.
-
Remove cover and padding from seat pan.
-
Remove control module.
-
Remove belt buckle.
-
Remove spring mat with wiring harness from seat pan.
-
Separate upper seat pan frame from lower seat pan frame.
-
Installing
-
Installation is reverse of removal.
3
-
Seat angle adjustment motor
4
-
Longitudinal seat adjustment motor
5
-
Backrest adjustment motor