S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-1802001.png)
Brake Caliper: Procedures
C41/C43
Brake calipers, servicing
Rear wheel brakes with automatic adjustment
Note:
^
Install all parts supplied in repair kit.
^
After replacing brake pads, depress brake pedal firmly several times with vehicle stationary so that the brake pads are properly seated in their
normal operating position.
^
To extract brake fluid from the brake fluid reservoir, use a bleeder bottle that only comes into contact with brake fluid. Brake fluid is poisonous
and must never be extracted by mouth using a hose!
1 - Self-locking hex bolt, 35 Nm
^
Always replace
^
Counter hold guide pin when loosening and tightening
2 - Brake caliper housing
^
Remove before replacing brake pads
^
Do not twist hose when installing
^
Do not disconnect brake hose when changing brake pads
^
Servicing brake calipers
3 - Brake pads
^
Always replace both sides
^
Do not disconnect brake hose when changing brake pads
^
Checking pad thickness
4 - Brake pad retaining spring
