S4 Quattro Wagon V8-4.2L (BHF) (2008)
Brake Caliper: Procedures
C38
Brake calipers, servicing
Rear brakes with automatic adjustment
Note:
^
Install all parts supplied in repair kit.
1 - Brake disc
^
Always replace both sides
^
Remove brake caliper prior to removing
^
Tighten evenly, on both sides, starting from thickness when new
2 - Ribbed bolt, 75 Nm
^
M10×1.25 x 60
^
Always replace
^
Use socket T40027
3 - Brake carrier with guide pins and protective caps
^
Replacement carriers are supplied assembled and with sufficient grease on guide pins
^
If protective caps or guide pins are damaged, replace using repair kit. Use grease packet supplied to lubricate guide pins.
4 - Ribbed bolt, 75 Nm
^
Always replace
^
M10×1.25 x 50
5 - Brake pads