S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-1878004.png)
-
Lay out sufficient lint free cloths in the area of the hydraulic control unit.
-
Disconnect the brake lines - 1 - and - 2 - and remove together with the rubber grommet.
-
Remove the brake booster bolts - 1 - ( (T45 ) Torx).
-
Remove the brake booster with brake master cylinder.
On vehicles installed with a cross brace the cross brace must be removed.
-
Removing and installing cross brace. Refer to => Steering and Suspension See: Steering and Suspension
