S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-760004.png)
-
Insert drive shaft - arrow - for oil pump into guide on oil pump.
Note:
^
To guarantee that the drive shaft engages correctly in the oil pump, insert the drive shaft into the oil pump separately, do not install together with
the front bearing cap.
-
Cut off nozzle on tube of sealant at front mark (dia. of nozzle approx. 1.5 mm).
-
Apply sealant beads - arrows - to clean sealing surfaces of spur gear unit as shown in illustration.
^
Thickness of sealant beads: 2.0 mm.
-
Position O-ring -1- and secure it with some grease.
Note:
^
The spur gear unit must be installed within 5 minutes after application of sealant.
