S4 Quattro Wagon V8-4.2L (BHF) (2008)
-
Hand tighten power take-off drive sprocket - 2 -.
-
Install chain for power take-off. Refer to => [ Power Take-Off Chain ] See: Accessory Drive/Service and Repair/Power Take-Off Drive Chain.
-
Tighten power take-off drive sprocket bolt - 1 -.
-
Slide power steering pump with new O-ring onto spur gear for power-steering pump drive.
The rest of installation is in reverse order of removal, note the following:
-
Install covers for timing chains. Refer to => [ Installing ] See: Timing Components/Timing Cover/Service and Repair/Timing Chain Covers.
-
Install engine. Refer to: Vehicles with manual transmission => [ Engine, Installing ] See: Service and Repair/Removal and Replacement/Engine,
Manual Transmission, Removing, vehicles with automatic transmission => [ Engine, Installing ] See: Service and Repair/Removal and
Replacement/Engine, Automatic Transmission, Removing and Installing.
-
Add engine oil and check oil level. Refer to => [ Oil Level, Checking ] See: Engine Lubrication/Testing and Inspection.
Tightening Specifications