S4 Quattro Wagon V8-4.2L (BHF) (2008)
Installing guide frame
-
Replace bolts - 1 to 20 -.
-
Tighten bolts for guide frame as follows:
-
Tighten bolts - 1 to 10 - to 30 Nm with torque wrench.
-
Tighten bolts - 11 to 20 - to 20 Nm with torque wrench.
-
Tighten bolts - 1 to 10 - to 50 Nm with torque wrench.
-
Tighten bolts - 11 to 20 - to 30 Nm with torque wrench.
-
Tighten bolts - 1 to 10 - 90 degrees (1/4 additional turn) using a rigid wrench.
-
Tighten bolts - 11 to 20 - 90 degrees (1/4 additional turn) using a rigid wrench.
-
Tighten bolts for sealing surfaces of cylinder block/guide frame - dark hatching in the illustration - to 9 Nm in diagonal sequence.