S4 Quattro Wagon V8-4.2L (BHF) (2008)
11
Vibration damper
‹› Removing and installing, refer to => [ Vibration Damper ] See: Cylinder Block Assembly/Harmonic Balancer - Crankshaft Pulley/Service and
Repair/Vibration Damper
12
22 Nm plus an additional 45° (1/8 turn)
‹› Replace
13
Idler roller for ribbed belt
14
22 Nm
15
Cap
16
Ribbed belt
‹› Check for wear
‹› Do not kink
‹› Before removing, mark direction of rotation using chalk or felt-tip marker Reversing the direction of rotation of a run-in belt can destroy the
belt
‹› Removing and installing, refer to => [ Ribbed Belt ] See: Drive Belt/Service and Repair/Ribbed Belt
‹› When installing ribbed belt, make sure it is seated correctly on the pulleys
17
Threaded bushing