S4 Quattro Wagon V8-4.2L (BHF) (2008)
-
Remove assembly device.
-
Place pull sleeve (T40048/2) on crankshaft and slide seal - 1 - into sealing surface on engine.
‹› Pull sleeve remains on crankshaft for pressing in.
-
Position pressure sleeve (T40048/3) with bolts M8•55 mm - arrows - on crankshaft.
-
Then screw in bolts by hand.
-
Tighten bolts each 1/2 rotation by alternating sides to press in seal until it reaches stop.