S4 Quattro Wagon V8-4.2L (BHF) (2008)
The rest of installation is in reverse order of removal, note the following:
-
Install vibration damper. Refer to => [ Vibration Damper ] See: Cylinder Block Assembly/Harmonic Balancer - Crankshaft Pulley/Service and
Repair/Vibration Damper.
-
Install lock carrier with attachments. Refer to =>
Radiator Support See: Body and Frame/Lock Carrier
-
Place torque support on rubber buffer for torque support and tighten bolts - arrows -.
-
Install front bumper cover.
-
Check headlamp adjustment.
Tightening Specifications