S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-880012.png)
-
Secure Hall sensor wheel on camshaft adjuster of intake camshaft of right cylinder head using setting gauge (T40047).
-
Place setting gauge (T40047) on bolt - 2 -.
-
Tighten camshaft bolt - 1 - on intake camshaft to final tightening specifications.
‹› Tightening Specifications: 100 Nm plus an additional 90° ( 1/4 turn).
-
Remove setting gauge (T40047).
-
Tighten camshaft bolt - 2 - on exhaust camshaft of right cylinder head to final tightening specifications.
‹› Tightening Specifications: 100 Nm plus an additional 90° ( 1/4 turn).
-
Remove crankshaft holder (3242).
