audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Fuel Pump Delivery Quantity, Checking|Page 2646 > < Fuel Pump Delivery Quantity, Checking|Page 2644
Page 4
background image

-

Observe pressure drop on gauge.

Pressure drops again:

-

If valve is defective, replace fuel pump (check valve defective). 

The pressure does not drop:

-

Replace fuel filter.

The pressure drops again:

-

Check pressure gauge for tightness.

‹› Before removing the pressure gauge, lower fuel pressure by opening the shut-off valve. Hold container at the connection.

‹› The assembly of the fuel system is in reverse order of removal.

-

Secure fuel hose to connection on fuel rail pipe. To do so, counterhold using an open-end wrench at each hex head - 1 - and -  3 - and tighten union
nut - 2 - to 22 Nm.

-

Bleed air from fuel system.

Bleed air from fuel system 

-

Start engine, run it at the middle rpm range for several minutes, and then turn ignition off again.

‹› The engine may run rough at the beginning because of air in the fuel system.

Fuel Pump Delivery Quantity, Checking|Page 2646 > < Fuel Pump Delivery Quantity, Checking|Page 2644