S4 Quattro Wagon V8-4.2L (BHF) (2008)
‹› Removing and installing, refer to => [ Evaporator ]
‹› Installing seals on evaporator, refer to => [ Evaporator ]
‹› Check the type of seal at the connections and the refrigerant lines. These must be designed for the same type of seal => [ Refrigerant Line to
Component Connections ] See: Refrigerant/Description and Operation/Refrigerant Circuit, Servicing
‹› Removed evaporator contains refrigerant oil which must be restored to refrigerant circuit.
6 - Evaporator seal
‹› Installing seals on evaporator, refer to => [ Evaporator ]
7 - Air distribution housing
‹› Do not dismantle
‹› With temperature flaps and air distribution flaps
‹› The connecting elements from temperature flaps 1 to temperature flaps 2 installed in the air distributor housing are visible when the air
distributor housing is removed, refer to => [ Connecting Elements between Temperatures Doors 1 and 2 ] See: Air Register/Description and
Operation.
8 - Front footwell vent
‹› Removing and installing, refer to => [ Left Front Footwell Vent ] See: Air Register/Service and Repair/Instrument Panel Vents and Air Ducts