S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-4043005.png)
-
Unclip retaining bracket.
-
If present, lay aside transmission control module with wiring connected.
-
Remove bolts - 2 - (Qty. 2) of connector station. Tightening specification 3 Nm.
-
Remove central tube bolt - 1 - for instrument panel in plenum chamber. Tightening specification 6 Nm.
-
Remove the left nuts - 1 - (Qty. 2). Tightening specification 35 Nm.
-
Remove upper bolt - 3 -. Tightening specification 6 Nm.
-
Unscrew Ground (GND) wires - 2 -.
-
Remove the right nut - 2 -. Tightening specification 35 Nm.
